Easy Ways Flash (Install Firmware) Lenovo A7000

Droidever - Smartphone Lenovo A7000 users, have you experimenting to do Flash or install the Firmware on your phone. Well, to you who are want to do Flash on Lenovo A7000. You're in luck, because this time we will expose about the firmware Install on smartphone Lenovo A7000. In doing this, the Flash has a risk that is similar to the process of hard reset, that will erase all data and files and applications stored in the internal memory.

To do so requires an effective step, by first backing up all the data contained therein before the flash process is done. Flash on android, could arguably almost the same with reinstalling Windows or Linux computer. But it, on android uses the ROM or the Firmware. In terms of generally crowds call this Custom ROM and Stock ROM.

Now, follow the isntruction list bellow, do it with your own risk.

Prepare Flash Lenovo A7000

• Firmware Lenovo A7000: Download
• Latest Version of flash tool : Download
• Lenovo A7000 USB Driver : Download 
• To ensure what is firmware used by your device, you can check by go to Setting - About - Software Information - Build Number.

Flashing Lenovo A7000

1. At the first time, please Install driver for Lenovo A7000 that already downloaded before. 
2. Extract the other downloaded file (firmware and flash tool) save in anywhere on your hard drive.
3. Then remove your back case, battery, sim card and SD Card  if installed
4. Next, Connect your Lenovo A7000 to Computer, while holding the power button and volume up. The PC will detect the new hardware, just ignore it. 
5. Then, release USB data cable from the PC.
6. Open SP flash tool software and click scatter load. find Lenovo A7000 scatter storage location earlier.
7. In the Scatter Loading field go to the folder where you extracted the Flash Tool and select MT6752_Android_scatter.txt
   
   
8. Then you click options - Download - then check DA DL all with checksum.
   
9. On download tab, ensure you have selected download only option from dropdown menu, see below picture.
   
10. Then, click download button on top right and connect your Lenovo A7000 with USB cable in phone switch off position.
    
11. Process will run automatic, and you can see the red stripe showing download percentage at bellow
12. When your process complete, you can see a green circle with tick mark.
    
13. Now disconnect your Lenovo A7000
14. Intall you battery again. 
15. Then, start your Lenovo A7000. (remember, on the first booting it will take a long time to start)
16. Success. enjoy

That's how tips or steps easy to Flash or Install Firmware the Lenovo A7000. But again keep in mind, not the origin of the wanton to do this activity. And for those of you who've already seen and read this tutorial, hopefully understand it.