Tutorial Flash Reset Stock ROM, Unbrick, Softbrick (Bootloop) Samsung Galaxy Note 4

Droidever - This tutorial is how to fix Galaxy 4 Note version of Indonesia with model number BC-N910 experiencing softbrick/bootloop. This can be done with the way to recovery or Flashing reset to stock ROM works if GAalaxy Note 4 experience failed to boot.

If still experiencing problems on the software then step to do first is get into recovery mode. If still having failed to boot, can with flashing reset to stock ROM. for it here is a tutorial for how to re flash the Stock ROM, Unbrick, Softbrick (Bootloop) Samsung Galaxy Note 4. In this way could also be to ROM Android 5.1.1 (latest), so for those who still Android 5.0 can also update through these steps.

Step 1 get into Recovery Mode

1. To get into Recovery mode, the trick is in the power off state, press Volume Up + Home + Power at the same time to the writing to the boot logo Galaxy Note 4 and then removed.
2. Wait a while longer to get into recovery mode.
3. If it goes into Recovery mode, navigation up/down by pressing the volume button, enter by pressing the power button.
4. Select wipe data/factory reset
5. Select wipe cache partition.
6. Next select the Reboot System.

Read also: Root the Samsung Galaxy S5 (SM-G900F) - Groovy Tutorial

Now see if Samsung Galaxy Note 4 yours still experiencing bootloop or not. If it is, the last way is with the stock ROM to flash. The following the steps:

The second step, Restart Flash Stock ROM Galaxy Note 4

1. Download dan Install Samsung USB Driver.
2. Download the latest Firmware for Samsung Galaxy Note 4 Android 5.1.1 . File: N910HXXU1COH4_N910HOLB1COH4_XSE .zip | Mirror 1 | Mirror 2 | Mirror 3. Then extract the file
3. Download the Odin3 v 3.10.7 here. Then Extract.
4. Disable/turn off your smartphone.
5. Run application ODIN.
6. Do Downloading Mode in Samsung Galaxy Note 4 by pressing and hold the Home button for a few seconds, the Volume Down and Power.
7. There will be a commemorative inscription, select Select volume up to proceed to Downloading Mode.
8. Connect Samsung Note 4 to the computer via the data cable
9. In ODIN will look "Added". Mark has already identified in the PC, if there is no check back drivers.
10. Next, click on the PDA/AP in ODIN.
11. Select the firmware already downloaded and extracted last select file tar.md5.
12. Make sure that re-partion is not checked and other settings are not modified.
13. Click the start button to start flashing.
14. Wait until ODIN writing "PASS".
15. Galaxy Note 4 yours will reboot, and it should be back to normal already as the new smartphone.

Read also: How To Get S-Pen Stuck Upside Down In The Galaxy Note 5

Well that's the tutorial which is not too difficult to perform Flash Reset Stock ROM, Unbrick, Softbrick (Bootloop) Samsung Galaxy Note 4. This article could be useful for those who seek it. In this way, may be welcome relief during your search. success for you!.